Our Danville-based crews carry the parts and the know-how to get your air moving again today. Priority scheduling available across Danville and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
Ask as many questions as you want; we'd rather over-explain than leave you unsure.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Danville, NH.
We're not interested in being the cheapest quote on the page — we're the company that tells you what actually needs fixing instead of what pads the ticket. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Danville's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Danville have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Danville is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Danville rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Danville dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Danville homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services rooftop units and package systems across Danville, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Danville households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
This is the standard every Danville technician on our team is held to.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
We quote a flat rate before work begins and that number doesn't change once you approve it.
If anything feels off after we leave, one call gets a tech back to your Danville address.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
This is one of the most common complaints we hear on service calls across Danville.
A tune-up often identifies exactly what's driving the extra energy use.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
We explain diagnostic fees and repair estimates before authorizing work.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Danville area.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Would recommend to anyone in Danville needing a real replacement, not a patch job."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Documentation for our records was thorough and easy to file."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
After thousands of service calls across Danville, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Danville area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Keeps the emergency truck stocked based on what actually fails most often locally.
Experienced with the light industrial and retail equipment common across the area.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
Every technician we send is licensed in accordance with Danville, NH requirements and carries full liability coverage.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Danville and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Danville.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Danville installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Danville, NH and near Danville, there's a strong chance we already service your street.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
